컴퓨터 자동으로 켜지게 하기.
컴퓨터 부팅후 Delete 키를 눌러 COMS SETUP 부분으로 들어갑니다.
메뉴에 POWER MANAGEMENT SETUP 부분으로 들어 갑니다.
POWER MANAGEMENT SETUP
|
ACPI function : Enabled Power Management : User Define PM Control by APM : Yes Video Off Method :V/H SYNC +Blank Video Off After : Standby CPU Fan Off Option : Suspend -> off Modem Use IRQ : NA Doze Mode : Disabled Stanby Mode : Disabled Suspend Mode : Disabled HDD Power Down : Disabled Throttle Duty Cycle : 62.5% Power Button Override : Enabled Resume by LAN : Disabled Power On by Ring : Disabled Power On by Alarm : Enabled - Date(of Month) : 24 - Time(hh : mm : ss) : 06 : 30 : 17 |
** PM Timer Events ** IRQ [3-7, 9-15], NMI : Enabled VGA Active Monitor : Enabled IRQ 8 Break Suspend : Disabled IDE Primary Master : Disabled IDE Primary Slave : Disabled IDE Secondary Master : Disabled IDE Secondary Slave : Disabled Floppy Disk : Disabled Serial Port : Enabled Parallel Port : Disabled Mouse Break Suspend : Yes |
|
BIOS SETUP 초기 화면 |
|
Disabled |
사용하지 않는다. | |||
|
Enabled |
사용한다. | |||
|
- Date(of Month) 날짜 |
MIN = 0 | |||
|
MAX = 31 | ||||
|
- Time(hh : mm : ss) 시간 |
hh : 시 |
mm : 분 |
ss : 초 | |
|
0 ~ 23 |
0 ~ 59 |
0 ~ 59 | ||
4 월 24일 06시30분 17초에 켜지게 한다면
Power On by Alarm : Enabled
- Date(of Month) : 24
- Time(hh : mm : ss) : 06 : 30 : 17
위에 처럼 되겠죠..